"Gazelle" Gas-2705>> Transmission>> Kardannaja transfer>> Possible malfunctions карданной transfers and ways of their elimination
Possible malfunctions карданной transfers and ways of their elimination
Cause of defect
Way of elimination
Knock in карданной to transfer at sharp change of movement of the car or at a gear change
Deterioration of bearings and thorns крестовин in hinges
To check up a radial backlash in bearings of hinges and if it exceeds 0,10 mm, to replace крестовину and bearings
Ослабло shaft fastening to a flange of a leading gear wheel of the back bridge
To tighten fastening by the set moment
Vibration карданной transfers
The balancing plate is lost
To make dynamic balancing of a shaft
The plug of an intermediate shaft is incorrectly established шлицевая
To establish шлицевую a plug in one plane with a sliding plug
Ослабло fastening of an intermediate support to a cross-beam the Raised palpation of a sliding plug in the transmission extension piece
To tighten fastening
Deterioration or breakage of one of hinges
Originally to turn a plug on шлицах on a corner 180 ° and to check up, whether palpation will decrease. If it does not decrease to replace the worn out details. At replacement шлицевой plugs a shaft dynamically отбалансировать
Breakage or damage of a flange of a leading gear wheel of the back bridge
To replace the hinge
Погнута or the pipe карданного a shaft is removed
To replace a flange
Ослабло shaft fastening to the back bridge
To examine a shaft, to check up its palpation and if it exceeds 0,8 mm, отрихтовать it, thus its palpation should be no more than 0,6 mm in any point on length. Отбалансировать a shaft dynamically. To tighten fastening
Malfunctions which come to light at survey
Проворачивание a cap with a cuff concerning a bearing glass (infringement of tightness of the hinge)
To replace крестовину in gathering with the bearing. Отбалансировать transfer
Проворачивание a bearing glass in plug apertures
To replace the worn out details, отбалансировать transfer