|
Possible malfunctions of a forward axis both steering draughts and ways of their elimination
|
|
Cause of defect
|
Way of elimination
|
|
Car <withdrawal> aside
|
|
Different pressure of air in tyres of forward wheels
|
To finish pressure in tyres to norm
|
|
The big difference in corners of a longitudinal inclination шкворня from the right and left parties
|
To check up, whether there is no twisting of a beam of a forward suspension bracket or deposits of forward springs, deterioration шкворней and plugs
|
|
The big difference in corners of disorder of the left and right wheels
|
To check up, whether there is no beam or deterioration deflection шкворней and plugs. At detection of curvature a beam to correct
|
|
Different inhaling of bearings of naves of forward wheels
|
To check up and adjust an inhaling of bearings of naves
|
|
Непараллельность axes of forward and back bridges
|
To check up mutual position of axes of forward and back bridges by distance gauging centre to centre wheels from the right and left parties. At difference detection to find the reason and to eliminate
|
|
Wagging of forward wheels
|
|
Disbalance of wheels with tyres in gathering
|
To replace or отбалансировать a wheel having the big disbalance
|
|
The raised deterioration in hinges of steering draughts
|
To replace the worn out hinges
|
|
The accelerated cross-section deterioration of a protector of the tyre
|
|
Wrong size of a convergence of wheels
|
To check up, whether погнуты cross-section draught or levers of a steering trapeze, and also whether is not present люфтов in hinges of cross-section draught. To correct погнутые details, to replace the worn out hinges. To adjust a convergence of wheels
|
|
Non-uniform deterioration of a protector of the tyre
|
|
The big disbalance of a wheel with the tyre in gathering
|
To replace or отбалансировать a wheel
|
|
Set of all reasons influencing non-uniform deterioration
|
To check up correctness of all corners of installation of wheels, their palpation, a condition of hinges of steering draughts and шкворней with plugs
|
|
Knocks at movement
|
|
Big axial люфт шкворня
|
To check up a backlash between the top lug of a fist and a beam lug. To finish a backlash to 0,15 mm, no more, installation of an adjusting steel lining. If necessary to replace the persistent bearing
|
|
Radial люфт шкворня in plugs
|
To replace шкворень with plugs
|
|
Insufficient inhaling of bearings of naves of forward wheels or destruction of bearings
|
To adjust an inhaling of bearings. To replace the damaged bearings
|
|
Backlashes in conic connections of fingers of steering draughts
|
To tighten nuts of fastening of fingers
|