"Gazelle" Gas-2705>> Car body>> Doors>> Possible malfunctions of locks, drives of locks and ways of their elimination

Fig. 10.11. The lock of a forward door (till February, 2000) and its drives: 1 — the external handle of a door; 2 — a drive of the external handle; 3 — a tip; 4 — an internal drive; 5 — a lining; 6 — the socket; 7 — the button of deenergizing of the lock; 8 — the tip plug; 9 — draught; 10 — a drive arm; 11 — a clip; 12 — draught; 13 — draught; 14 — a lead; 15 — the lock switch; 16 — the screw; 17 — a washer; 18 — a thorn; 19 — запорный the lock mechanism; 20 — the lever mechanism of the lock; 21 — a tip; 22 — draught





Fig. 10.11А. The lock of a forward door (after February, 2000) and its drives: 1 — the external handle of a door; 2 — a drive of the external handle; 3 — tips; 4 — an internal drive; 5 — an overlay; 6 — the socket; 7 — the button; 8 — the tip plug; 9, 12, 13 and 23 — draughts; 10 — a drive arm; 11 — a clip; 14 — a lead; 15 — the lock switch; 16 — a plate of fastening of the switch of the lock; 17, 18 — screws; 19 — a lock clamp; 20 — запорный the lock mechanism; 21 — the lock mechanism lever; 22 — a draught tip; 24 — a cover





Cause of defect
Way of elimination
The door is not closed or closed only give to drink a vigorous push
At installation a thorn of a clamp of the lock of a door will shift in a cabin
To weaken fastening of a thorn and to put forward it outside on 1-2 mm
Adjustment of an external or internal drive of the lock is incorrectly executed
To check up separately correctness of adjustments of an external and internal drive
The door is not blocked neither outside, nor from within the car
Adjustments of an external or internal drive are incorrectly executed
To execute separately necessary adjustments and to check up work of mechanisms of blocking
The door is not closed completely (only on a safety tooth)
The buffer запорного the mechanism disturbs to moving of a rotor of the lock
To put a rotor into place or to replace запорный the mechanism
The external handle of a door does not work
The ledge of the external handle is broken. The tip of a drive 3 (fig. 10.11 and 10.11А see) "has burst" or has broken
The external handle to replace.
To replace a tip or a drive
The external handle does not come back in a starting position after opening
Заедают drive levers
To weaken a rivet of levers, to grease a drive and to check up its work, in case of unsatisfactory result - a drive to replace
Does not work запорный the lock mechanism
Moving (turn) of a rotor and lock cam is complicated
The zapornyj mechanism to replace