Fig. 10.21. The Rear-view mirror: 1 — заглушка; 2 — a casing; 3 — a rear-view mirror; 4 — a rack; 5 — the plug; 6 — the screw of fastening of a mirror; 7 — a rack support; 8 — a spring; 9 — a washer; 10 — a nut; 11 — the screw of fastening of a support; 12 — a lining

For the review behind and sideways the car rear-view mirror cabins (fig. 10.21), located at the left and on the right the car serve uncontrollable from within. Both mirrors 3 have spherical optical elements. For correct installation of the left external mirror it is necessary to turn a mirror rack forward; then, having weakened the screw of fastening of a mirror to a rack 6, to turn a mirror in a horizontal plane on a necessary corner after that a mirror to fix. For turn in a vertical plane a mirror to turn a hand on necessary size. For correct installation of the right external mirror it is necessary to turn a mirror rack in relation to a support back. Other operations carry out similarly.

For maintenance травмобезопасности in an emergency it is provided special подпружиненное the device 4, 7, 8, 9, 10 for which account there is a turn ("folding") of a mirror.

The external rear-view mirror — not maintainable knot, and in case of its damage is required replacement of all knot for what it is enough to turn away the screw with internal шестигранником 6, to take out the plug 5 and a mirror 3. Rear-view mirror installation to make upside-down.