"Gazelle" Gas-2705>> Car body>> Doors>> Навеска cabin doors

Fig. 10.20. Навеска cabin doors: 1 — a door loop; 2 — a bolt of fastening of a loop; 3 — a terminator arm; 4 — a finger; 5 — a terminator stopper; 6 — the terminator lever; 7 — the buffer




For opening of a door of a cabin and its deduction in vertical position, and for restriction of a corner of opening and fixing (deduction) of a door loops serve in open position — the terminator of a door of roller type (fig. 10.20).
Door loops are supplied металлофторопластовыми by plugs and do not demand leaving in operation. For replacement of a door of a cabin in case of its damage on loops is available болтовое connection, having turned on which and having disconnected the terminator lever (it is necessary to take out a finger), it is possible to remove a door from a cabin.
Installation of the new or repaired door is made upside-down: it is fixed on a cabin, and then the terminator lever joins.
In case of breakage (breakage) of the lever of the terminator it is necessary to replace it. Operation of the car with the broken lever is not supposed because of possible damage of a door.
Replacement of the lever of the terminator should be spent in a following order:
- To remove the handle стеклоподъемника;
- To remove the socket of the handle of an internal drive;
- To remove a hand-rail on a door;
- To remove обивкy and an antinoise lining;
- To remove шплинт and a finger of fastening of the lever of the terminator of an arm;
- To take out the broken lever;
- To establish the new lever with the buffer;
- Other assemblage to make upside-down.